2015年前SCI论文

1. Wang, QC; Ke, YL; Xing, HY; Weng, ZY; Yang, FE. Evaluation of residual stress relief of aluminum alloy 7050 by using crack compliance method. Transactions of Nonferrous Metals Society of China, 2003, 13(5):1190-1193．

2. Dong, HY; Ke, YL. Simulation of 3D chip shaping of aluminum alloy 7075 in milling processes. Transactions of Nonferrous Metals Society of China, 2005, 15(6): 1315-1321.

3. Zhang Bin, Yao Bao-guo, Ke Ying-lin. A novel posture alignment system for aircraft wing assembly. Journal of Zhejiang University(Science A:An International Applied Physics & Engineering Journal), 2009, 10(11):1624-1630.

4. Bi Yun-bo, Cheng Qun-lin, Dong Hui-yue, Ke Ying-lin. Machining distortion prediction of aerospace monolithic components. Journal of Zhejiang University(Science A:An International Applied Physics & Engineering Journal), 2009, 10(5): 661-668.

5. Xiong R. B., Ke Y. L., Huang P. J. An Adaptive Posture Following and Keeping Fixture Based on Aerostatic Bearing and Universal Ball Joint for Aircraft Digital Assembly. Materials Science Forum, 2009, 626-627: 623-628.

6. Ke Yinglin, Dong Huiyue, Liu Gang, Zhang Ming. Use of nitrogen gas in high-speed milling of Ti-6Al-4V. Transactions of Nonferrous Metals Society of China, 2009, 19:530-534.

7. Wu, EQ; Ke, YL; Du, BJ. Noncontact Laser Inspection Based on a PSD for the Inner Surface of Minidiameter Pipes. IEEE Transactions on Instrumentation and Measurement, 2009, 58: 2169-2173.

8. Liugang. Study on deformation of titanium thin-walled part in milling process. Journal of Materials Processing Technology, 2009, 209: 2788–2793.

9. Jinhai Yu, Qiang Fang, Yinglin Ke. Trajectory planning of multi-robot coordination platform for locating large subassembly. International Hournal of Modeling, Identification and Control, 2009, 6(4) :357-366.

10. Guo Zhimin, Jiang Junxia, Ke Yinglin. Stiffness of Postural Alignment System Based on 3-Axis Actuators for Large Aircraft  Components. Chinese Journal of Mechanical Engineering, 2010, 23(4): 524-531.

11. Bian, Keke , Ke, Yinglin. Global continuity adjustment and local shape optimization technique for complex trimmed surface model. Chinese Journal of Mechanical Engineering, 2010, 23(2):225-232.

12. Qiu Bao-gui, Jiang Jun-xia, Ke Ying-lin. A new principle and device for large aircraft components gaining accurate support by ball joint. Journal of Zhejiang University-Science A, 2011, 12(5 ):405-414.

13. Ying, Zheng, Ke, Yinglin. Modeling and simulation of aligning process for alignment mechanism of large aircraft component. 2nd International Conference on Intelligent Structure and Vibration Control, 2012, 351-355.

14. Weidong Zhu, Qu W, Cao L, Yang D, Ke Y. An off-line programming system for robotic drilling in aerospace manufacturing. Int J Advanced Manufacturing Technology, 2013, 68(9):2535–2545.

15. Gang Liu, Honglun Huan, Ying-Lin Ke. Study on analysis and prediction of riveting assembly variation of aircraft fuselage panel. Int J Advanced Manufacturing Technology, 2014, 75(5):991–1003.

16. Gang Liu, Wei Tang, Ying-LIN Ke, Qing-Liang Chen, Yunbo Bi. Modeling of fast pre-joining processes optimization for skin stringer panels. Assembly Automation, 2014, 34(4): 323-332.

17. Jiefeng Jiang, Yunbo Bi, Huiyue Dong, Yinglin Ke, Xintian Fan and Kunpeng Du. Influence of interference fit size on hole deformation and residual stress in hi-lock bolt insertion. Proc. Inst. Mech. Eng., Part C: Journal of Mechanical Engineering Science, 2014, 228(18): 3296-3305.

18. Weidong Zhu, Biao Mei, Guorui Yan, Yinglin Ke. Measurement error analysis and accuracy enhancement of 2D vision system for robotic drilling. Robotics and Computer-Integrated Manufacturing, 2014, 30(2):160-171.

19. Weidong Zhu, Biao Mei, Yinglin Ke. Kinematic modeling and parameter identification of a new circumferential drilling machine for aircraft assembly. Int J Advanced Manufacturing Technology, 2014, 72(5):1143–1158.

20. Weidong Zhu, Biao Mei, Yinglin Ke. Inverse kinematics solution of a new circumferential drilling machine for aircraft assembly. Robotica, 2014, 34(1):98-117.

21. Weidong ZHU, Biao MEI, Guo-rui YAN, Ying-lin KE. Development of a monocular vision system for robotic drilling. Zhejiang Univ Sci C (Comput & Electron), 2014, 15(8):593-606.

22. Liang Cheng, Wang Qing, Li Jiangxiong, Ke Yinglin. A posture evaluation method for a large component with thermal deformation and its application in aircraft assembly. Assembly Automation, 2014, 34(3):275–284.

23. Yunbo Bi, Weimiao Yan and Yinglin Ke. Numerical study on predicting and correcting assembly deformation of a large fuselage panel during digital assembly. Assembly Automation, 2014, 34(2): 204-216.

24. Zhangjun Jin, Cijun Yu, Jiangxiong Li, Yinglin Ke. A robot assisted assembly system for small components in aircraft assembly. Industrial Robot: An International Journal, 2014, 41(5): 413-420.

25. Yunbo Bi, Jifeng Jiang, Yinglin Ke. Effect of interference fit size on local stress in single lap bolted joints. Advances in Mechanical Engineering, 2015, 7(6): 1-12.

26. Gang Liu, Wei Tang, Ying-Lin Ke, Qing-Liang Chen, Xue-Mei Chen. Pre-joining process planning model for a batch of skin stringer panels based on statistical clearances. Int J Advanced Manufacturing Technology, 2015, 78(1): 41-51.

27. Qiang Fang, Zemin Pan, Shaohua Fei, Xiangnan Xie, Yinglin Ke. A Novel Helical Milling End-Effector and Its Application. IEEE/ASME Transactions on Mechatronics, 2015, 20(6): 3112-3122.

28. Yingjie Guo, Huiyue Dong,Yinglin Ke. Stiffness-oriented posture optimization in robotic machining applications. Robotics and Computer-Integrated Manufacturing, 2015, 35: 69-76.

29. Biao Mei, Weidong Zhu, Kangzheng Yuan, Yinglin Ke. Robot base frame calibration with a 2D vision system for mobile robotic drilling. Int J Advanced Manufacturing Technology, 2015, 81(9):1903-1917.

30. Biao Mei, Weidong Zhu, Huiyue Dong, Yinglin Ke. Coordination error control for accurate positioning in movable robotic drilling. Assembly Automation, 2015, 35(4):329-340.

31. Biao Mei, Weidong Zhu, Guorui Yan, Yinglin Ke. A new elliptic contour extraction method for reference hole detection in robotic drilling. Pattern Analysis and Applications, 2015, 18(3): 695-712.

32. Qiang Fang, Ze-Min Pan, Bing Han, Shao-Hua Fei, Guan-Hua Xu,Ying-Lin Ke. A force sensor-less method for CFRP/Ti stack interface detection during robotic orbital drilling operations. Mathematical Problems in Engineering, 2015, 1-11.

33. Qiang Fang,Yu-Chao Li, Shao-Hua Fei, Yong-Wei Han, Ying-Lin Ke. Error modeling and compensation of circular motion on a new circumferential drilling system. Mathematical Problems in Engineering, 2015, (4): 1-8.

34. Zhangjun Jin, Cijun Yu, Jiangxiong Li, Yinglin Ke.. Configuration Analysis of the ERS Points in Large-Volume Metrology System. Sensors, 2015, 15(9): 24397-24408.

35. Qing Wang, Yadong Dou, Jiangxiong Li, Yinglin Ke. A zigzag path based joining method for fuselage panels in digital assembly. Assembly Automation, 2015, 35(4):289-301.

36. Qing Wang, Peng Huang, Jiangxiong Li, Yinglin Ke. Uncertainty evaluation and optimization of INS installation measurement using Monte Carlo Method. Assembly Automation, 2015, 35(3):221-233.

37. Liang Cheng, Qing Wang, Jiangxiong Li, Yinglin Ke. Variation modeling for fuselage structures in large aircraft digital assembly. Assembly Automation, 2015, 35(2):172-182.

38. Qing Wang, Peng Huang, Jiangxiong Li, Yinglin Ke. A new boresighting method of the aircraft gun using a laser tracker. Sensor Review, 2015, 35(3):251-262.

39. Yunbo Bi, Weimiao Yan, Yinglin Ke. Multi load-transmitting device based support layout optimization for large fuselage panels in digital assembly. Inst. Mech. Eng., Part C: Journal of Mechanical Engineering Science, 2015, 229(10):1792-1804.

40. Hongshuang Zhang, Junxia Jiang, Yinglin Ke, Qing Wang. Optimal selection of the supporting points of large component alignedand positioned by parallel manipulator. Proc. Inst. Mech. Eng. Part C Journal of Mechanical Engineering Science, 2015, 230(17):3066-3075.

 2016年SCI论文

1. Di Yang, Weiwei Qu, Yinglin Ke. Evaluation of residual clearance after pre-joining and pre-joining scheme optimization in aircraft panel assembly. Assembly Automation, 2016, 36(4): 376-387.

2. Jiang Jiefeng, Bi Yunbo. Effect of parameters on local stress field in single-lap bolted joints with the interference

   fit. Advances in Mechanical Engineering, 2016, 8(5): 1-12.

3. Honglun Huan, Liang Cheng, Yinglin Ke. Dynamic modeling and sensitivity analysis of dual-robot pneumatic riveting system for fuselage panel assembly. Industrial Robot: An International Journal, 2016, 43(2):221-230.

4. Yingjie Guo, Huiyue Dong, Guifeng Wang, Yinglin Ke. Vibration analysis and suppression in robotic boring process. International Journal of Machine Tools and Manufacture, 2016, 101:102-110.

5. Lan Zhou, Yinglin Ke, Huiyue Dong, Zupeng Chen, Kaiye Gao. Hole diameter variation and roundness in dry orbital drilling of CFRP/Ti stacks. Int J Advanced Manufacturing Technology, 2016, 87(1): 811-824.

6. Guifeng Wang, Huiyue Dong, Yingjie Guo, Yinglin Ke. Dynamic cutting force modeling and experimental study of industrial robotic boring. Int J Advanced Manufacturing Technology, 2016, 86(1): 179-190.

7. Weidong Zhu, Along Zhang, Biao Mei, Yinglin Ke. Automatic stepping for circumferential splice drilling in aircraft

   fuselage assembly. Industrial Robot: An International Journal, 2016, 43(2):144-152.

8. Qing Wang, Peng Huang, Jiangxiong Li, Yinglin Ke. Assembly accuracy analysis for small components with a planar surface in large-scale metrology. Measurement Science and Technology, 2016, 27(4):1-13.

9. Weimiao Yan, Yunbo Bi, Mingjie Qiao. Effect of positioning errors of frames on fuselage panel assembly deformation. Advances in Mechanical Engineering, 2016, 8(5): 1-11.

10. Gao, Chong-Yang; Zhang, Liang-Chi; Liu, Peng-Hui. The role of material model in the finite element simulation of high-speed machining of Ti6Al4V. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2016, 230(17):2959-2967. 

11.  Gao, Chongyang; Xiao, Jianzhang; Xu, Jiuhua; Ke, Yinglin. Factor analysis of machining parameters of fiber-reinforced polymer composites based on finite element simulation with experimental investigation. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83(5):1113–1125. 

2017年SCI论文

1. Weiwei Qu ,Wei Tang ,Yinglin Ke. Pre-joining processes optimization method for panel orienting to the clearances suppression of units and the clearances flow among units. Int J Advanced Manufacturing Technology, 2017, 9-12:1-15.

2. Changyi Lei, Yunbo Bi, Jiangxiong Li and Yinglin Ke. Effect of Riveting Parameters on the Quality of Riveted Aircraft Structures with Slug Rivet. Advances in Mechanical Engineering, 2017, 9(11): 1-12.

3. Dan Zhao, Yunbo Bi,Yinglin Ke. An efficient error compensation method for coordinated CNC five-axis machine tools. International Journal of Machine Tools and Manufacture, 2017, 123:105-115.

4. Guifeng Wang, Huiyue Dong, Yingjie Guo, Yinglin Ke.. Chatter mechanism and stability analysis of robotic boring. Int J Advanced Manufacturing Technology, 2017, 91:411-421.

5. H Liu, W Zhu, H Dong, Y Ke. A helical milling and oval countersinking end-effector for aircraft assembly. Mechatronics, 2017, 46(): 101-114.

6. Zhou Lan,Dong huiyue,Ke Yinglin,Chen Guanglin. Analysis of the chip-splitting performance of a dedicated cutting tool in dry orbital drilling process. Int J Advanced Manufacturing Technology, 2017, 90:1809-1823.

7. Lei C, Cong Li, Yunbo Bi, Jiangxiong Li. The optimal clamping force option for robotic drilling of stacked aluminum sheets based on shell theory. Advances in Mechanical Engineering, 2017, 9(3): 1-9.

8. Qiang Fang, Weidong Chen, Shaohua Fei, Anan Zhao, Changxi Deng. Control system Designing for correcting wing-fuselage assembly deformation of a large aircraft. Assembly Automation, 2017, 37(1):22-33.

9. Yunbo Bi, Weimiao Yan, Yinglin Ke. Optimal placement of measurement points on large aircraft fuselage panels in digital assembly. Proc. Inst. Mech. Eng., Part B: Journal of Engineering Manufacture, 2017, 231(1): 73-84.

10. Junxia Jiang, Chen Bian, Yinglin Ke. A new method for automatic shaft-hole assembly of aircraft components. Assembly Automation, 2017, 37(1):64-70.

11. Qing Wang, Yadong Dou, Liang Cheng, Yinglin Ke. Shimming design and optimal selection for non-uniform gaps in wing assembly. Assembly Automation, 2017, 37(4):471-482.

12. Qing Wang, Yadong Dou, Jiangxiong Li, Yinglin Ke. An assembly gap control method based on posture alignment of wing panels in aircraft assembly. Assembly Automation, 2017, 37(4):422-433.

13. Gao, Chongyang; Zhan, Bin; Chen, Lianyi; Li, Xiaochun. A micromechanical model of graphene-reinforced metal matrix nanocomposites with consideration of graphene orientations. COMPOSITES SCIENCE AND TECHNOLOGY, 2017, 152(2017):120-128. 

14. Zhu, Linli; Wen, Chunsheng; Gao, Chongyang; Guo, Xiang; Lu, Jian. A study of dynamic plasticity in austenite stainless steels with a gradient distribution of nanoscale twins. SCRIPTA MATERIALIA, 2017, 133(2017):49-53. 

15. Gao, Chongyang; Jia, Jiguang. Factor analysis of key parameters on cutting force in micromachining of graphene-reinforced magnesium matrix nanocomposites based on FE simulation. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92(9):3123–3136. 

16. Wang, Qing; Wang, Lingyun; Zhu, Weidong; Xu, Qiang; Ke, Yinglin. Design optimization of molds for autoclave process of composite manufacturing. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2017, 36(21) 1564–1576. 

17. Zu, Lei; Zhu, Weidong; Dong, Huiyue; Ke, Yinglin. Application of variable slippage coefficients to the design of filament wound toroidal pressure vessels. COMPOSITE STRUCTURES, 2017,  172 (2017) 339–344. 

18. Liu Hua;Zhu Weidong;Ke Yinglin. Pose alignment of aircraft structures with distance sensors and CCD cameras. Robotics and Computer Integrated Manufacturing, 2017, 48(2017)30-38. 

19.  Chen, Shengkai; Fang, Shuiliang; Peng, Tao; Tang, Renzhong. Operation Mode Study in Cloud Manufacturing Ecosystem. Procedia CIRP, 2017, 61(2017):347-352. 

20. Gao, Chong Yang; Xiao, Jian Zhang; Zhang, Liang Chi; Ke, Ying Lin. On the static and dynamic properties of fiber-reinforced polymer composites: A three-phase constitutive model. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2017, 30(11):1560-1577. 
    

 2018年SCI论文

1. Cheng Liang; Wang Qing; Ke Yinglin. Experimental and numerical analyses of the shimming effect on bolted joints with nonuniform gaps. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,2018, 0(0):1-12.

2. Wang Guifeng; Dong Huiyue; Guo Yingjie. Early chatter identification of robotic boring process using measured force of dynamometer. The International Journal of Advanced Manufacturing Technology, 2018, 94(1):1243-1252.

3. Zhou Lan; Dong Huiyue; Ke Yinglin. Modeling of non-linear cutting forces for dry orbital drilling process based on undeformed chip geometry. The International Journal of Advanced Manufacturing Technology, 2018, 94(1):203-216.

4. Cheng Liang; Wang Qing; Li Jiangxiong. Propagation analysis of variation for fuselage structures in multi-station

   aircraft assembly. Assembly Automation, 2018, 38(1):67-76.

5. Zhao Dan; Bi Yunbo; Ke Yinglin. Kinematic modeling and base frame calibration of a dual-machine-based drilling and riveting system for aircraft panel assembly. The International Journal of Advanced Manufacturing Technology, 2018, 94(5):1873-1884.

6. Zhao Dan; Bi Yunbo; Ke Yinglin. A united kinematic calibration method for a dual-machine system. Assembly Automation, 2018, 38(2): 226-238.

7. Zhao Dan; Bi Yunbo; Ke Yinglin. Kinematic modeling and inverse kinematics solution of a new six-axis machine tool for oval hole drilling in aircraft wing assembly. International Journal of Advanced Manufacturing Technology, 2018, 96(5-8):2231-2243.

8. Guo Yingjie; Dong HuiYue; Wang Guifeng. A robotic boring system for intersection holes in aircraft assembly. Industrial Robot: An International Journal, 2018, 45(3):328-336.

9. Zhao Dan; Bi Yunbo; Ke Yinglin. An efficient error prediction and compensation method for coordinated five-axis machine tools under variable temperature. The International Journal of Advanced Manufacturing Technology, 2018, 96(9):4431-4443.

10. Lei Changyi; Bi Yunbo; Li Jiangxiong. Experiment and numerical simulations of a slug rivet installation process based on different modeling methods. The International Journal of Advanced Manufacturing Technology, 2018, 97(1):1481-1496.

11. Liu Hua; Zhu Weidong; Dong Huiyue. An improved kinematic model for serial robot calibration based on local POE formula using position measurement. Industrial Robot: An International Journal, 2018, 45(5):573-584.

12. Wang Guifeng; Dong Huiyue; Guo Yingjie. Finite element simulation and experimental analysis of robotic boring based on an approach of equivalent stiffness. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2018, 232(11):2008-2018.

13. Lei Changyi; Bi Yunbo; Li Jiangxiong. Slug rivet assembly modeling and effects of procedure parameters on the quality of riveted lap joints. Advances in Mechanical Engineering, 2018, 10(9): 1-12.

14. Mei Biao; Zhu Weidong; Ke Yinglin. Positioning variation analysis and control for automated drilling in aircraft

    manufacturing. Assembly Automation, 2018, 38(4): 412-419.

15. Xiao Jianzhang; Gao Chongyang; Ke Yinglin. An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates. Machining Science and Technology, 2018, 22(6): 1012-1028.

16. Wang Qing; Hou Renluan; Li Jiangxiong. Analytical and experimental study on deformation of thin-walled panel with non ideal boundary conditions. International Journal of Mechanical Sciences, 2018, 149:298-310.

17. Dolkun Dilmurat; Zhu Weidong; Xu Qiang. Optimization of cure profile for thick composite parts based on finite element analysis and genetic algorithm. Journal of Composite Materials, 2018, 52(28):3885-3894.

18. Wang Qing; Hou Renluan; Li Jiangxiong. Positioning variation modeling for aircraft panels assembly based on elastic deformation theory. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2018, 232(14):2592-2604.

 2019年SCI论文

1. Jiang Junxia; Bian Chen; Bi Yunbo. A new type of inner-side working head for automatic drilling and riveting system. Assembly Automation, 2019, 39(1):154-164.

2. Wang Haijin; Dong Huiyue; Ke Yinglin. Modeling and analysis of force prediction in milling process of unidirectional fiber reinforced polymer composites. The International Journal of Advanced Manufacturing Technology, 2019, 101(9):3073-3080.

3. Cheng Liang;   Wang Qing; Ke Yinglin. Experimental and numerical analyses of the shimming   effect on bolted joints with nonuniform gaps. Proceedings of the Institution   of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,2019, 233(11) 3964-3975.     

4. Shengkai Chen, Shuiliang Fang, Renzhong Tang. A Reinforcement Learning Based Approach for Multi-Projects Scheduling in Cloud Manufacturing. International Journal of Production Research, 2019, 57(10):3080-3098.     

5. Wang, Qing; Wang, Lingyun; Zhu, Weidong; Xu, Qiang; Ke, Yinglin. Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates. Journal of Composite Materials, 2019, 54(1) 127-138.     

6. Biao Mei, Weidong Zhu, Yinglin Ke, Pengyu Zheng. Variation analysis driven by small-sample data for compliant aero-structure assembly. Assembly Automation, 2019, 39(1):101-112.     

7. Biao Mei, Weidong Zhu, Pengyu Zheng, Yinglin Ke. Variation modeling and analysis with interval approach for the assembly of compliant aeronautical structures. Proceedings of the Institution   of Mechanical Engineers Part B Journal of Engineering Manufacture, 2019, 233(3):948-959.     

8. Chen Bian,Junxia Jiang,Yinglin Ke. End stiffness modeling for automatic horizontal dual-machine cooperative drilling and riveting system. The International Journal of Advanced Manufacturing Technology, 2019, 2019/7/8: 1-10.     

9. Yaoyao Ye, Weidong Zhu, Junxia Jiang, Qiang Xu*, Yinglin Ke. Computational modelling of postbuckling behavior of composite T stiffened panels with different bonding methods. Composites: Part B, 2019, 166: 247-256.     

10. Song, Xiaowen; Qi, Yuchen; Zhang, Mingxiao; Zhang, Guogeng; Zhan, Wenchao. Application and optimization of drag   reduction characteristics on the flow around a partial grooved cylinder by using the response surface method. Engineering Applications of Computational Fluid Mechanics, 2019, 13(1): 158-176.     

11. Changyi Lei, Quan Chen, Yunbo Bi*, Jiangxiong Li and Yinglin Ke. An Effective Theoretical Model for Slug Rivet   Assembly Based on Countersunk Hole Structure. International Journal of Advanced Manufacturing Technology, 2019, 101(1-4):1065-1074.     

12. Jintong Liu, Heng Li, Yunbo Bi*, Huiyue Dong and Yinglin Ke. Influence of the deformation of riveting-side working head on riveting quality. International Journal of Advanced Manufacturing Technology, 2019, 102(9), 4137-4151.     

13. Jintong Liu, Ze Zhao, Yunbo Bi* and Huiyue Dong. Prediction and compensation of force-induced deformation for a dual-machine based riveting system using FEM and neural network. International Journal of Advanced Manufacturing Technology, 2019, 103(9-12):3853-3870.     

14. Ruofeng Wei, Yunbo Bi*. Research on Recognition Technology of Aluminum Profile Surface Defects Based on Deep Learning. Materials, 2019, 12(10), 1681.     

15. Yang Di，Qu Weiwei，Ke Yinglin. Local-global method to predict distortion of aircraft panel caused in automated riveting process. Assembly Automation, 2019, 39(5),973-985.     

16. Zhu, Weidong; Li, Guanhua; Dong, Huiyue; Ke, Yinglin. Positioning error compensation on two-dimensional manifold for robotic machining. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2019, 59 (2019) 394-405.     

17. Liu, Hua; Zhu, Weidong; Dong, Huiyue; Ke, Yinglin. An adaptive ball-head positioning visual servoing method for aircraft digital assembly. Assembly Automation, 2019, 39(2):287-296.     

18. Wang, Lingyun; Zhu, Weidong; Wang, Qing; Xu, Qiang; Ke, Yinglin. A heat-balance method for autoclave process of composite manufacturing. Journal of Composite Materials, 2019, 53(5):641-652.    

19. Renluan Hou, Qing Wang*, Jiangxiong Li, Yinglin Ke. Modified Fourier–Galerkin Solution for Aerospace Skin-Stiffener Panels Subjected to Interface Force and Mixed Boundary Conditions. Materials, 2019, 12(17):2794.     

20. Song, XiaoWen; Zhang, MingXiao. Turbulent Drag Reduction Characteristics of Bionic Nonsmooth Surfaces with Jets. , 2019, 9(23), 5070. 

21. Xiao, Jianzhang, Gao, Chongyang*, Wang Guifeng, Huang Pengcheng. Investigation on the effects of microstructure on machining unidirectional carbon fiber reinforced polymer composites with a modified force model. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2019, 38(8): 379-394. 

22. Junxia Jiang, Yuxiao He,Yinglin Ke. Pressure distribution for automated fiber placement and design optimization of compaction rollers. Journal of Reinforced Plastics and Composites, 2019, 38(18): 860-870. 

23. Liu, Yi; Fang, Qiang; Zhao, Anan; Yang, Feng; Wang, Hongsheng; Ke, Yinglin. Design of DOB-based riveting force controller for dual-machine horizontal drilling and riveting system. Mechatronics (Oxford), 2019, 63(2019):102263. 

24. Xiao, Jianzhang; Gao, Chongyang; Wang, Guifeng; Huang, Pengcheng. Investigation on the effects of microstructure on machining unidirectional carbon fiber reinforced polymer composites with a modified force model. Journal of reinforced plastics and composites, 2019, 38(8):379-394. 

25. Jiang, Junxia; Zhang, Shenglin; He, Yuxiao. Wheel design and motion analysis of a new heavy-duty AGV in aircraft assembly lines. Assembly Automation, 2019, 40(3):387-397. 

26. Zhang, Yifan; Wang, Qing; Zhao, Anan; Ke, Yinglin. A multi-object posture coordination method with tolerance constraints for aircraft components assembly. Assembly Automation, 2019.10, 40(2):345-359. 

 2020年SCI论文

1.  Yaoyao Ye, Weidong Zhu, Junxia Jiang, Qiang Xu, Yinglin Ke. Design and optimization of composite sub-stiffened panels. Composite Structures, 2020, 240 (2020) 112084. 

2. Zhu, Weidong; Liu, Hua; Ke, Yinglin. Sensor-Based Control Using an Image Point and Distance Features for Rivet-in-Hole Insertion. IEEE Transactions on Industrial Electronics, 2020, 67(6):4692-4699. 

3. Liu, Mengnan; Fang, Shuiliang; Dong, Huiyue; Xu, Cunzhi. Review of digital twin about concepts, technologies, and industrial applications. Journal of manufacturing systems, 2020 . 

4. Chen, SK; Fang, SL; Tang, RZ. An ANN-Based Approach for Real-Time Scheduling in Cloud Manufacturing. APPLIED SCIENCES-BASEL, 2020, 10(7):2491-2512. 

5. Miao, Ying; Song, Xiaowen; Wang, Jun; Lu, Zhonghua. NC machining verification algorithm based on the STL model. International journal of advanced manufacturing technology, 2020, 110(5-6):1153-1161. 

6. Yan, Senbo; Song, Xiaowen; Liu, Guocong. Deeper and Mixed Supervision for Salient Object Detection in Automated Surface Inspection. Mathematical problems in engineering, 2020, 2020:1-12. 

7. Jianming Tang, Weidong Zhu and Yunbo Bi*. A Computer Vision-Based Navigation and Localization Method for Station-Moving Aircraft Transport Platform with Dual Cameras. Sensors, 2020, 20(1), 279. 

8. Jintong Liu, Anan Zhao, Piao Wan, Huiyue Dong and Yunbo Bi*. Modeling and Optimization of Bidirectional Clamping Forces in Drilling of Stacked Aluminum Alloy Plates. Materials, 2020, 13(12), 2866. 

9. Jintong Liu, Anan Zhao, ZhenZheng Ke, Zhiqiang Li and Yunbo Bi*. Investigation on the Residual Stresses and Fatigue Performance of Riveted Single Strap Butt Joints. Materials, 2020, 13(15), 3436. 

10. Jintong Liu, Anan Zhao, Yi Liu, Huiyue Dong, Yunbo Bi*. Numerical and experimental investigation on the rivet head flushness in automatic countersunk riveting. International Journal of Advanced Manufacturing Technology, 2020, 110:395-411. 

11. Jintong Liu, Anan Zhao, ZhenZheng Ke, Zhengdong Zhu and Yunbo Bi*. Influence of Rivet Diameter and Pitch on the Fatigue Performance of Riveted Lap Joints Based on Stress Distribution Analysis. Materials, 2020, 13(16), 3625. 

12. He, Ruming; Qu, Weiwei; Ke, Yinglin. An improved path discretization method for automated fiber placement. Journal of reinforced plastics and composites, 2020, 39(13-14):545-559. 

13. Li, M; Gong, Q; Cao, P; Wang, H; Qiao, J; Yu, YY; Lu, WB; Di, JT; Zhang, ZG; Zheng, LX; Li, QW. Rational and wide-range tuning of CNT aerogel conductors with multifunctionalities. Nanoscale, 2020, 12(25):13771-13780. 

14. Liu, H; Zhu, WD; Dong, HY; Ke, YL. Hybrid Visual Servoing for Rivet-in-hole Insertion Based on Super-twisting Sliding Mode Control. International journal of control, automation, and systems, 2020, 18( 8):2145-2156. 

15. Li, Guanhua; Yang, Shuang; Cao, Siming; Zhu, Weidong; Ke, Yinglin. A semi-supervised deep learning approach for circular hole detection on composite parts. The Visual computer, 2020, （2020):1-13. 

16. Zhou, Weizhu; Cheng, Qunlin; Xu, Qiang ; Zhu, Weidong; Ke, Yinglin. Deformation and fracture mechanisms of automated fiber placement pre- preg laminates under out-of-plane tensile loading. Composite structures, 2020, 255：112948. 

17. Lei, Changyi; Li, Jiangxiong. Effect of rivet die structure on the quality of riveted aircraft structures using slug rivet. International Journal of Advanced Manufacturing Technology, 2020, 107(1-2):229-245. 

18. Cheng, Liang; Huan, Honglun; Ke, Yinglin. Elastic-plastic analysis and riveting energy control for dual-robot pneumatic riveting system. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020, 234(9):1836-1847. 

19. Du, Mingming; Wang, Haijin; Dong, Huiyue ; Guo, Yingjie; Ke, Yinglin. Numerical research on kerf characteristics of abrasive waterjet machining based on the sph-dem-fem approach. International journal of advanced manufacturing technology, 2020, 111( 11-12):3519-3533. 

20. Wu, Jianbo; Cheng, Liang; Bi, Yunbo ; Li, Jiangxiong; Ke, Yinglin. Kinematic modeling and parameter identification for a heavy gantry-type automated fiber placement machine considering gravity deformation. Proceedings of the Institution of Mechanical Engineers. Part C, Journal of mechanical engineering science, 2020, 0(0) 1–14. 

21. Liu, Yi; Fang, Qiang; Ke, Yinglin. Hybrid Position/Force Control for Dual-Machine Drilling and Riveting System. Mathematical problems in engineering, 2020, 2020:1-16. 

22. Gu, Yihong; Liu, Yucheng; Lu, Congda ; Hu, Shugen; Song, Xiaowen. Effect of Compressive Strain of Brake Pads on Brake Noise. Shock and vibration, 2020, 2020:1-11. 

23. Dolkun, Dilmurat; Wang, Han; Wang, Haijin ; Ke, Yinglin. Influence of Large Framed Mold Placement in Autoclave on Heating Performance. Applied composite materials, 2020, 27(6):811- 837. 

24. Han Wang; Weiwei Wang; Haijin Wang; Huiyue Dong; Yinglin Ke. Thermal management for thermoset automated fiber placement based on infrared heater structure arrangement. Chinese Journal of Aeronautics, 2020, In press.

 2021年SCI论文

1. Liu, Mengnan; Fang, Shuiliang; Dong, Huiyue; Xu, Cunzhi. Review of digital twin about concepts, technologies, and industrial applications. Journal of manufacturing systems, 2021, 58 (2021) 346–361. 

2. Jiang, Junxia; He, Yuxiao; Wang, Han ; Ke, Yinglin. Modeling and experimental validation of compaction pressure distribution for automated fiber placement. Composite Structures, 2021, 256 (2021): 113101. 

3.    Li, Guanhua; Zhu, Weidong; Dong, Huiyue ; Ke, Yinglin. A method for robot placement optimization based on two-dimensional manifold in joint space. Robotics and Computer-Integrated Manufacturing, 2021, 67 (2021): 102002. 

4.    Mei, Biao; Liang, Zengsheng; Zhu, Weidong ; Ke, Yinglin. Positioning variation synthesis for an automated drilling system in wing assembly. Robotics and Computer-Integrated Manufacturing, 2021, 67 (2021):102044. 

5.    Li, Guanhua; Zhu, Weidong; Dong, Huiyue ; Ke, Yinglin. Stiffness-oriented performance indices defined on two-dimensional manifold for 6-DOF industrial robot. Robotics and Computer-Integrated Manufacturing, 2021,  68 (2021):102076. 

6.    Qu, Weiwei; Gao, Jiaxin; Yang, Di ; He, Ruming; Yang, Qian; Cheng, Liang; Ke, Yinglin. Automated fiber placement path generation method based on prospective analysis of path performance under multiple constraints. Composite structures, 2021, 255(2021)112940. 

7.    Qu, Weiwei; He, Ruming; Cheng, Liang ; Yang, Di; Gao, Jiaxin; Wang, Han; Yang, Qian; Ke, Yinglin. Placement suitability analysis of automated fiber placement on curved surfaces considering the influence of prepreg tow, roller and AFP machine. Composite structures, 2021, 262(2021)113608. 

8.    Gao, Jiaxin; Qu, Weiwei; Yang, Di ; Zhu, Weidong; Ke, Yinglin. Two-Stage Sector Partition Path Planning Method for Automated Fiber Placement on Complex Surfaces. Computer aided design, 2021, 132 (2021) 102983. 

9.    Gao, Yu; Song, Xiaowen; Ding, Huiming ; Wang, Han; Wang, Haijin; Ke, Yinglin. Influence of fiber cutting at the composite grid intersection on the compressive performance of laminate. Composite structures, 2021, 267 (2021) 113859.

10. Qian, Shimeng; Liu, Xin; Ye, Yaoyao ; Xu, Qiang; Zhang, Ting; Li, Xiangqian. Effect of gap and overlap fiber placement defects on the delamination behavior of L-shaped composite laminates. Composite structures, 2021, 268:113963. 

11. Zhou, Weizhu; Cheng, Qunlin; Xu, Qiang ; Zhu, Weidong; Ke, Yinglin. Deformation and fracture mechanisms of automated fiber placement pre-preg laminates under out-of-plane tensile loading. Composite structures, 2021, 255:112948. 

12. Tang, Yipeng; Wang, Qing; Wang, Han ; Li, Jiangxiong; Ke, Yinglin. A novel 3D laser scanning defect detection and measurement approach for automated fibre placement. Measurement science & technology, 2021, 32(7):75201. 

13. Ji, Guobiao; Cheng, Liang; Fei, Shaohua ; Li, Jiangxiong; Ke, Yinglin. A Novel Model of Z-Pin Insertion in Prepreg Based on Fracture Mechanics. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of engineering manufacture, 2021, 235(12):1971-1982. 

14. Gao, Chongyang; Ruan, Huanren; Yang, Chenlong ; Wang, Fang. Investigation on microcapsule self-healing mechanism of polymer matrix composites based on numerical simulation. Polymer Composites, 2021, 42(7):3619-3631. 

15. Gao, Chongyang; Zhan, Bin; Yang, Chenlong. A static/dynamic micromechanical model of graphene-reinforced polymer matrix nanocomposites with consideration of the nanoscale interphase. Mechanics of materials, 2021, 157(2021)103838. 

16. Zhang, Haowei; Yang, Di; Ding, Huiming ; Wang, Han; Xu, Qiang; Ma, Yicheng; Bi, Yunbo. Effect of Z-pin insertion angles on low-velocity impact mechanical response and damage mechanism of CFRP laminates with different layups. Composites. Part A, Applied science and manufacturing, 2021, 150:106593. 

17. Zhao, Anan; Zhang, Yongliang; Zhu, Chunrun ; Zhong, Zhengwei; Bi, Yunbo. Effect of the Position of the Boundary Rivets on the Quality of Riveted Single Strap Butt Joints. Materials, 2021, 14(18):5127. 

18. Zhenzheng Ke, Yongliang Zhang, Yuchi Liu, Zhengwei Zhong, Chunrun Zhu, and Yunbo Bi*. Numerical Study on the Impact of Gap between Sheets on the Quality of Riveted Single-Strap Butt Joints. Coatings (Basel), 2021, 11(11): 1375. 

19. Cheng, Liang; Zhang, Li; Li, Jiangxiong ; Ke, Yinglin. Modeling and Compensation of Volumetric Errors for a Six-Axis Automated Fiber Placement Machine Based on Screw Theory. Proceedings of the Institution of Mechanical Engineers. Part C, Journal of mechanical engineering science, 2021, 0(0):1-16. 

20. Cheng, Liang; Ji, Guobiao; Fei, Shaohua ; Li, Jiangxiong; Ke, Yinglin. Analysis and modeling of the Z-pin insertion in prepreg based on contact mechanism. Polymer composites, 2021, 2021:1-12. 

21. Liu, Xin; Qian, Shimeng; Ye, Yaoyao ; Xu, Qiang; Li, Xiangqian. Effect of process parameters on mode-II interlaminar fracture toughness and fractographic features of automated fibre placement prepreg laminates. Journal of composite materials, 2021, 0(0) 1–13. 

22. Zhou, Weizhu; Zhu, Weidong; Xu, Qiang ; Ke, Yinglin. Out-of-plane tensile failure behavior of fiber reinforced composites due to lay-up temperature induced intra-ply and inter-ply voids. Composite structures, 2021.9, 271:114150. 

2022年SCI论文

1.  Cao, Siming; Cheng, Qunlin; Guo, Yingjie ; Zhu, Weidong; Wang, Haijin; Ke, Yinglin. Pose error compensation based on joint space division for 6-DOF robot manipulators. Precision engineering, 2022, 74(2022):195-204.